top of page

VACUUM OVENS & VACUUM PUMPS

Easyvac 9 Vacuum Pump
EasyVac 9

EasyVac 9 CFM Dual-Stage Vacuum Pump with Oil Mist Filter

Price:

$790.00

Our new EasyVac 9 CFM vacuum pump is now 110V/220V 50/60Hz switchable!

​

Ai EV9 are dual-stage high speed sliding-vane rotary compact vacuum pump with KF25 vacuum connector. Comes with all necessary fittings and a exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run. It is important to note that pumps should always be ran in a well ventilated area.

​

Free KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included.

Ai SuperVac 11.3 CFM

Ai SuperVac 11.3 CFM Corrosion-Resist 2-Stage Pump UL/CSA

Price:

$2,300.00

The new Ai SuperVac 11.3 cfm commercial grade vacuum pumps are now UL/CSA certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. They are also more powerful (1,100kW vs 750W) and corrosion resistant. These pumps are designed for reliable long time continuous operation, theywill take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.

​

Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust.

​

It is important to note that pumps should always be ran in a well ventilated area.

​

Free high capacity exhaust oil mist filter ($250 value), KF25 flexible stainless steel bellow (3.3 ft), clamps and centering rings set ($219 value) included.

​

Features
  • UL 61010-1 and CSA C22.2 certified (115V model)

  • 45% more powerful 1,100W motor vs 750W in the previous version

  • Corrosion-resistant design for durable operation in various environment

  • Adjustable gas ballast

  • Built-in oil back-flow prevention check valve

  • Internal forced oil cycling system

  • Integrated cylinder structure

  • Exhaust filter with easy-to-change replaceable filter element

  • Heavy duty structure and designed for reliable long time operation

  • Low noise

  • All necessary fittings and filter included for immediate use

  • 2-year warranty

Agilent IDP-7

Agilent IDP-7 5.4 CFM Oil-Free Compact Dry Scroll Pump

Price:

$4,263.00

The new Agilent IDP-7 dry scroll pump is a compact, high performance, oil-free vacuum pump, delivering large pumping speed capacity and simple maintenance.

Agilent IDP dry scroll pumps are oil-free, compact, quiet, high performance vacuum pumps. IDP pumps use a single-sided scroll design that allows for a straightforward 15 minute maintenance procedure with simple tools. Large pumping speeds and compact sizes are ideal for many applications in the research, analytical instrument, and laboratory markets. 

IDP pumps are hermetic, with the motor and all bearings completely isolated from the vacuum path. This design extends the bearing life and provides clean, dry vacuum to the application. An inlet isolation valve is available as an integral option that adds no additional height to the pump.

Ai cold trap

Ai Cold Trap with 500ml x 3 Traps: 110V, UL/CSA Certified

Price:

$3,390.00

The newly re-designed Ai -40°C/F T40 cold traps now all come UL/CSA certified, standard. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity.

​

In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.

​

Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.

​

Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.

​

Ai UL/CSA certified T40-UL -40°C/°F cold trap features

  • UL 471:2010 and CSA C22.2 certified

  • 1.5X more reservoir and 1.6X more trap capacity compare to its predecessor

  • No dry ice or liquid nitrogen needed

  • All steel housing for durability

  • Small footprint, built-in swivel casters for mobility

  • Plug and play, no assembly required

Ai vacuum oven

Ai Vacuum Oven 1.9 CF, 5 Sided Heat & SST Tubing. UL/CSA Certified

Price:

$1,980.90

FIVE ALUMINUM SHELVES INCLUDED WITH OVEN PURCHASE.

​

Introducing the new Ai UL/CSA certified AccuTemp 1.9 cubic foot vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is the secondary over-temp  protection dial, all stainless steel tubing/compression fittings, stainless steel vacuum/vent valve, oil-filled vacuum gauge, 5 sided pad heating technology and two year warranty. The thermal-conductive aluminum shelves provide excellent temperature uniformity inside the chamber, while our 3rd gen LCD low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C.

AccuTemp-19 series digital desktop vacuum ovens feature a 1.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.

Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities.

​

Attention: Before initial use, run oven at 400°F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process.

Aluminum pan shelf for accutemp & elite vacuum ovens

Edge-Folded Aluminum Pan Shelf for AccuTemp & Elite Vacuum Ovens

Price:

$69.00

* Shelf prices vary depending on size, price above reflects sizing for AccuTemp 1.9 cu ft oven: 16"x14"x14". More sizes available upon request.

Premium quality aluminum pan shelf with folded edges for Ai AccuTemp and Elite series vacuum ovens. Aluminium, in addition to being a great thermal and electrical conductor, is also remarkable for its light weight and its ability to resist corrosion.

 

Important! For AccuTemp 0.9 and 1.9 cu ft vacuum ovens, these shelves are only compatible with the newest models with slide-in shelf support, NOT the older models with brackets/clips.

16 CF vacuum oven with 6 shelves

16 CF Vacuum Oven with 6 Shelves & SST Tubing. UL/CSA Certified 

Price:

$15,831.00

Introducing the new Across International UL/CSA certified AccuTemp 16 cu ft vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is the secondary over-temp protection dial, 2.5X larger internal tubing for a quicker vacuum purge and release, and a secondary door handle to provide a better sealing on the door gasket. Come in 110V or 220V and backed by our 2-year warranty.

​

The AccuTemp-160 series digital vacuum oven features a gigantic 16 cubic feet easy-to-clean stainless steel chamber with a large 3/4" tempered glass safety window. With our new internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption.

Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.

Features

  • Six well thermo-conductive aluminum heated shelves with individual in-shelf temperature sensor, heater and digital temperature controller.

  • All stainless steel internal vacuum tubing and compression fittings that holds vacuum 10 times longer and deeper than with rubber tubing. They also provide you the most sanitary working environment, while last for decades without maintenance.

  • Oil-filled mechanical vacuum gauge ensures the most accurate and stable measurements.

  • Built-in secondary over-temp dial for added protection.

  • Adjustable vacuum and vent port with needle valves gives you control over vacuum and vent rates, while also largely enhanced durability.

  • 3rd gen low proportional gain temperature controller keeps your oven temperature within +/- 1°F accuracy, in either °F or °C.

  • Built-in white LED lights

  • Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.

  • Dual layer observation window with 3/4" tempered safety glass.

  • Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.

  • A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried.

  • Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.

  • Built-in station-able swivel casters with locks for ultra-portability.

  • All ovens shipped from our Nevada or New Jersey locations for quick delivery, and come with one year warranty and lifetime US-based parts and service support.

  • Guaranteed US based phone and email assistance within 30 minutes from our engineers.

 

Manufactured in accordance with

  • UL 61010-1

  • CSA C22.2

  • ISO 9001:2000

  • ISO 12100-1:2003, ISO 12100-2:2003

  • EN1050:1996, EN294:1992, EN60204-1:2006

  • CE

E44 Elite series digital vacuum oven

4.4 CF Vacuum Oven with 6 Aluminum Shelves 

Price:

$7,990.00

The E44 ELITE series digital vacuum ovens feature our 5-side chamber jacket heating system that covers left, right, up, down and backside of the chamber; all metal internal vacuum tubing (compare to rubber hose) for better vacuum levels and durability; and build-in secondary over-temp dial for enhanced over temperature protection. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber.

​

Every one of our vacuum ovens goes through a 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.

AccuTemp 3.2 CF vacuum oven

3.2 CF Vacuum Oven with all SST Tubing. UL/CSA Certified

Price:

$5,481.00

Introducing the new UL/CSA certified AccuTemp 3.2. cu ft vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. Also come standard is the secondary over-temp protection dial, stainless steel tubing, stainless steel vacuum & vent valve, oil-filled vacuum gauge, and two year warranty. With our new internal shelf heating technology, each shelf in these ovens has its own heater, in-shelf temperature sensor and temperature controller, together with great thermal-conductive aluminum and our new low proportional controller technologies, the result is perfect uniformity, accurate temperature, super-fast heating rates, minimum heat loss/exterior temperature and very low power consumption.

​

Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is quality controlled in New Jersey or Nevada before leaving our warehouses.

​

Features

  • All stainless steel internal tubing provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.

  • Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.

  • All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability.

  • Three alumimum heating shelves with individual in-shelf temperature sensor, temperature controller and heater.

  • Dual layer observation window with 5/8" tempered safety glass.

  • 3rd gen low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C.

  • Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.

  • A vacuum environment lowers the boiling point (great for processing heat sensitive materials) and reduces drying time for materials like paste or powder which cannot otherwise be easily dried.

  • Built-in wheels for ultra portability

  • Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.

  • For improved temperature tracking, run the auto-tune procedure as outlined in the manual.

  • Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.

  • All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with one year warranty and lifetime US-based parts and service support.

  • Guaranteed US based phone and email assistance within 30 minutes from our engineers.

 

Manufactured in accordance with

  • UL 61010-1

  • CSA C22.2

  • ISO 9001:2000

  • ISO 12100-1:2003, ISO 12100-2:2003

  • EN1050:1996, EN294:1992, EN60204-1:2006

  • CE

bottom of page